prosim vas za pomoč pri izbiri komponent za čoln, ki ga vidite na sliki.
- coln1.JPG (178.38 KiB) Pogledano 1641 krat
Nekaj sem tudi gruntal že sam vendar nisem našel tistega pravega odgovora.
Komponente, ki bi jih izbral sam seveda pa nevem če so prave, mogoče premočne, prešvoh, nekvalitetne, dobre
.Motor: http://www.hobbyking.com/hobbyking/stor ... ouse_.html
Kv: 3180rpm/v
Diameter: 36mm
Length: 60mm
Shaft diameter: 5mm
Max voltage: 18V
Max current: 94A
Idle current: 2.7A
Weight: 280g
Regler: http://www.hobbyking.com/hobbyking/stor ... ouse_.html
Specs:
Constant Current: 90A
Burst Current: 120A
Battery: 2-6S Lipoly
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Cooling: Watercooled
Size: 87 x 38 x 22mm
Weight: 105g
Programming Functions:
Running Mode: Forward with brake / Forward and reverse with brake / Forward and reverse
Acceleration: 6% / 9% / 12%
Low Voltage Protection: None / 2.6V / 2.8V / 3.0V / 3.2V / 3.4V
Start Mode (Punch): Level 1 / Level 2 / Level 3 / Level 4 / Level 5 / Level 6 / Level 7 / Level 8 / Level 9
Reverse Force: 25% / 50% / 75% / 100%
Timing: 0° / 5° / 10° / 15° / 20° / 25° / 30° / Automatic
Baterija: http://www.hobbyking.com/hobbyking/stor ... %203s%2025
Spec.
Capacity: 4500mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 25C Constant / 50C Burst
Weight: 361g (including wire, plug & case)
Dimensions: 169x49x23mm
Balance Plug: JST-XH
Discharge Plug: 4mm bullet-connector
Zanima me še za regulator, če ga je potrebno programirati pred začetkom uporabe, ali ga lahko uporabim takoj ? in kaj pomeni "Forward and reverse with brake" v praksi ?
Še enkrat vas lepo prosim za pomoč pri izbiri, mogoče bi kaj pasalo tudi iz strani
mibo modeli, pričakujem vaše ideje. Več glav več ve
Hvala.
