usbavr

[urosh]

Zdravo.

Včeraj sem dobil to programator: http://www.multircshop.com/site/index.p ... uct_id=603
In namestil gonilike, ki so napisani zraven potem sem poizkusil tudi z gonilniki iz http://www.fischl.de/usbasp/

Vedno pa v kkflashtool dobim isto napako:
Flash the firmware from repository.

D:Quadlibavrdudewindowsavrdude.exe -C D:Quadlibavrdudewindowsavrdude.conf -p m168p -P COM1 -c usbasp -B 8 -e -U lfuse:w:0xe2:m -U hfuse:w:0xde:m
avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc

avrdude.exe done. Thank you.

Error during setting the fuses.
Flashing of firmware aborted.

Ima kdo kako idejo kaj bi bilo narobe?

Z gonilniki iz drugega linka, če preverim s programom testlibusb-win mi kaže, kot da je povezava in vse dela ok:
DLL version: 0.1.12.1
Driver version: 1.2.4.0

bus/device idVendor/idProduct
bus-0/\.libusb0-0001--0x067b-0x2303 067B/2303
- Manufacturer : Prolific Technology Inc.
- Product : USB-Serial Controller
wTotalLength: 39
bNumInterfaces: 1
bConfigurationValue: 1
iConfiguration: 0
bmAttributes: 80h
MaxPower: 50
bInterfaceNumber: 0
bAlternateSetting: 0
bNumEndpoints: 3
bInterfaceClass: 255
bInterfaceSubClass: 0
bInterfaceProtocol: 0
iInterface: 0
bEndpointAddress: 81h
bmAttributes: 03h
wMaxPacketSize: 10
bInterval: 1
bRefresh: 0
bSynchAddress: 0
bEndpointAddress: 02h
bmAttributes: 02h
wMaxPacketSize: 64
bInterval: 0
bRefresh: 0
bSynchAddress: 0
bEndpointAddress: 83h
bmAttributes: 02h
wMaxPacketSize: 64
bInterval: 0
bRefresh: 0
bSynchAddress: 0

Flashati pa ne morem nikakor.

kaj narediti?

[daddyrider]

Nevem sicer kako kk boardi komunicirajo, samo tole kar si dal ti link je samo USB to SERIAL konverter, manjka ti potem takem še programator če se ne motim?

[mucek]

Kot je že napisal predhodnik, je zadeva le USB-TTL konverter, programiranje pa se izvaja preko bootloaderja, vpisanega v mikrokrmilnik.

Konkretno tvoje težave ne poznam, ampak glede na opis mi izgleda, kot da programator (program) ne bi prepoznal USB-TTL vmesnika. Ali vmesnik v Control panel vidiš kot virtualni Com port?

Lp, Gregor

[urosh]

Halo.

Ja, vidim ga normalno. Le nikakor mi noče poslat FW na ploščo...

lp