Portal Modelarji.com


https://forum.modelarji.com/

Autocad

https://forum.modelarji.com/viewtopic.php?t=37784

Stran 4 od 4

Objavljeno: 16 Avg 2011, 13:47
Napisal/-a JKP
spet vem nekaj novega..o autocadu..

Hvala !

Jože K.

Re: autocad

Objavljeno: 26 Apr 2012, 19:42
Napisal/-a brejker
Rišem v avtoCADu 2011. Zakaj mi kroge riše v obliki večkotnikov? Prav tako, ko kopiram krivuljo na novo mesto...mi jo skopira lomljeno. Čez nekaj časa je po tem zopet lepo kriva. Kako odpravit težavo?

Re: autocad

Objavljeno: 26 Apr 2012, 20:53
Napisal/-a Kralj Luka
Pomojem imaš naštimano slabo grafiko(resolucijo) vsaj tako je bilo pri meni. Upam da me ne bo kakšen računalničar linčal če sem se zmotil pri besedišču.

Re: autocad

Objavljeno: 26 Apr 2012, 21:19
Napisal/-a JKSniper
napiši "re" in stisni enter. Gre tudi z ukazom "regen" in enter.

To je zgolj za šparanje s procesorsko močjo.

LP!
Jure

Re: autocad

Objavljeno: 26 Apr 2012, 21:24
Napisal/-a brejker
Hvala obema. Se je zrihtalo samo od sebe :lol: Tale z "re + enter" mi je všeč!

Re: autocad

Objavljeno: 27 Apr 2012, 00:20
Napisal/-a mzakelj
Super bi bilo ko bi bil en odelek " risanje in načrti " v splošni temi. Zlo veliko ljudi bi radi kaj sami zrisali, ampak ne znajo osnov.

Re: autocad

Objavljeno: 11 Maj 2012, 10:15
Napisal/-a brejker
Rišem načrt ki bo sprintan "malo bolj" podoben pravilni tehnični dokumentaciji...
Rad bi označil kotirne črte tako, da so po printanju manj vidne kot ostale črte.
Uporabil bi drug layer samo za kotirne črte. Vprašanje je na koliko mm naj nastavim vidnost črt, da bo opazna razlika na papirju.

p.s. Vsi ostali layerji so na "default" debelini.

Hvala

Re: autocad

Objavljeno: 11 Maj 2012, 13:59
Napisal/-a jozy
Ker študiram na fakulteti za arhitekturo veliko rišem tudi v autocadu.
Kote daj na layer ki ima sivo barvo tako se bo tudi vse lepo vidlo kote pa ne bodo motile načrta.
Z debelinami pri prindanju pa nikoli ne grem pod 0.09 tako da ti priporočam tudi tebi da pod to debelino ne greš.

Save AS

Objavljeno: 27 Mar 2013, 18:21
Napisal/-a brejker
It is me again :lol:

Funkcija Saveas mi dela težave. Oziroma problem je tak:
Včasih sem si datoteko, ki jo obdelujem shranil tako enostavno kot sliko.
File,saveas, browzam kam hočem datoteko shranit (USB naprimer), obkljukam spodaj v kakšni obliki jo hočem shranit (dxf,dwg,...letnik Avtocada ! ) in v oknu spodaj desno kliknem- shrani.

Sedaj k problemu:
Ko kliknem na fukncijo saveAS se mi "oblaček" ne prikaže več in se namesto tega vklopi vrstica spodaj kamor ponavadi vtipkavam dimenzije, re + enter (funkcijo) :) ,...
In po novem moram tam na peš napisati kam shranjujem datoteko in v kakšni obliki jo hočem shranit (dwg,dxf,...) in v kakšnem letniku naj se shrani.
Ta letnik je pomemben, ker pri cncju je zainštaliran 2007 . Jaz pa rišem na 2010.

Kako je prišlo do te spremembe ne vem. Verjetno sem že kaj brihtoliral po funkcijah 8) :lol:
Do sedaj sem preko usbja prenesel že par datotek in vse so se zaenkrat odprle. Hočem odpravit težavo ker nikoli ne vem ali se bom moral voziti gorpadol zaradi napake pri tipkanju oblike,letnika datoteke.

Vprašanje sledi:
Kako spravit funkcijo nazaj, da bom lahko shranjeval "v oblačku" kot sem včasih?

Hvala

Re: autocad

Objavljeno: 04 Apr 2013, 09:06
Napisal/-a JKSniper
Nekje obstaja neka nastavitev, da tipkaš v novo popup okno ali direkt v vrstico za funkcije. Tudi za vtipkanje mere se ti včasih lahko prestavi da sploh ne kaže in moreš tipkat direktno v to spodnje okno. Verjetno se da nastavit nekje v nastavitvah, če ne pa v nastavitvah ki jih odpreš z beležnico. Meni se je zgodilo nekaj podobnega in sem odpravil BP. Google it.

LP!
Jure

Re: autocad

Objavljeno: 21 Maj 2013, 10:06
Napisal/-a cmaet
Če še nisi rešil težave z oknom za delo z fajli...

Pogovorno okno za delo s fajli se da vklapljat in izklapljat. Z vrednostjo 1 ga vklopiš, z vrednostjo 0 ga izklopiš.
V ukazno vrstico napiši "filedia" + enter. Vnesi vrednost "1" + enter.

Re: autocad

Objavljeno: 13 Dec 2013, 13:19
Napisal/-a brejker
:oops:
:lol:

Imam sformatiran računalnik in mi nagaja aCAD2010.
Zaenkrat je problem sledeč:

Rišem. Ni problema.
Ko pa zoomam se mi element premakne proti drugi črti [-(
Slika pred zoomom in po zoomom. Sedaj delo stoji saj ne morem nadaljevati z risanjem Alu kotnika [-(

Re: autocad

Objavljeno: 13 Dec 2013, 13:25
Napisal/-a jozy
utipki regen pa enter mogoče bo pomagal
al pa spremeni merilo... pač vse poscaili za 100 al pa 0.01

Re: autocad

Objavljeno: 13 Dec 2013, 15:15
Napisal/-a JKSniper
Dovolj je, če napišeš "re" :P

LP!
Jure

Re: Autocad

Objavljeno: 03 Avg 2014, 16:42
Napisal/-a Krist
Jaz imam bolj resno težavo. Danes sem tik preden je zmanjkalo elektrike shranil datoteko, vsaj mislil sem, da mi je to uspelo.... Je sploh kakšna možnost obnovit zadevo. Stari recover file je od torka in je čisto neuporaben. Kar koli poizkusim, ne deluje. Gre za novi model ki je praktično zrisan, večino kosov sem že postavil na plošče.

Re: Autocad

Objavljeno: 03 Avg 2014, 17:34
Napisal/-a Andrej Petrovčič
BAK file preimenuj v DWG. To je edino, če recover ne dela.

Lp, A

Re: Autocad

Objavljeno: 03 Avg 2014, 18:03
Napisal/-a Krist
Andrej Petrovčič napisal/-a:BAK file preimenuj v DWG. To je edino, če recover ne dela.

Lp, A
recover ne deluje. Sem probal tudi na praznem fajlu vtipkat recover, pa izbral datoteko in je mlelo, na koncu pa prazno.
62116) Null Layer Redirected
AcDbLine(62117) Null Layer Redirected
AcDbLine(62118) Null Layer Redirected
AcDbArc(62119) Null Layer Redirected
AcDbLine(6211A) Null Layer Redirected
AcDbLine(6211B) Null Layer Redirected
AcDbArc(6211C) Null Layer Redirected
AcDbLine(626DD) Null Layer Redirected
AcDbLine(626DE) Null Layer Redirected
AcDbLine(626DF) Null Layer Redirected
AcDbLine(626E0) Null Layer Redirected
AcDbArc(626E1) Null Layer Redirected
AcDbArc(626E2) Null Layer Redirected
AcDbArc(626E3) Null Layer Redirected
AcDbArc(626E4) Null Layer Redirected
AcDbCircle(626E5) Null Layer Redirected
AcDbArc(626E6) Null Layer Redirected
AcDbCircle(626E7) Null Layer Redirected
AcDbArc(626E8) Null Layer Redirected
AcDbLine(626E9) Null Layer Redirected
AcDbLine(626EA) Null Layer Redirected
AcDbLine(626EB) Null Layer Redirected
AcDbLine(626EC) Null Layer Redirected
AcDbLine(626ED) Null Layer Redirected
AcDbArc(626EE) Null Layer Redirected
AcDbLine(626EF) Null Layer Redirected
AcDbArc(626F0) Null Layer Redirected
AcDbLine(626F1) Null Layer Redirected
AcDbLine(626F2) Null Layer Redirected
AcDbArc(626F3) Null Layer Redirected
AcDbArc(626F4) Null Layer Redirected
AcDbLine(626F5) Null Layer Redirected
AcDbLine(626F6) Null Layer Redirected
AcDbLine(626F7) Null Layer Redirected
AcDbLine(626F8) Null Layer Redirected
AcDbLine(626F9) Null Layer Redirected
AcDbLine(626FA) Null Layer Redirected
AcDbLine(626FB) Null Layer Redirected
AcDbLine(626FC) Null Layer Redirected
AcDbLine(626FD) Null Layer Redirected
AcDbLine(626FE) Null Layer Redirected
AcDbLine(626FF) Null Layer Redirected
AcDbLine(62700) Null Layer Redirected
AcDbLine(62701) Null Layer Redirected
AcDbLine(62702) Null Layer Redirected
AcDbLine(62703) Null Layer Redirected
AcDbLine(62704) Null Layer Redirected
AcDbLine(62705) Null Layer Redirected
AcDbLine(6270C) Null Layer Redirected
Pass 2 11900 objects auditedAcDbLine(6270D) Null Layer
Redirected
AcDbLine(6270E) Null Layer Redirected
AcDbLine(6270F) Null Layer Redirected
AcDbArc(62710) Null Layer Redirected
AcDbArc(62711) Null Layer Redirected
AcDbArc(62712) Null Layer Redirected
AcDbArc(62713) Null Layer Redirected
AcDbCircle(62714) Null Layer Redirected
AcDbArc(62715) Null Layer Redirected
AcDbCircle(62716) Null Layer Redirected
AcDbArc(62717) Null Layer Redirected
AcDbLine(62718) Null Layer Redirected
AcDbLine(62719) Null Layer Redirected
AcDbLine(6271A) Null Layer Redirected
AcDbLine(6271B) Null Layer Redirected
AcDbLine(6271C) Null Layer Redirected
AcDbArc(6271D) Null Layer Redirected
AcDbLine(6271E) Null Layer Redirected
AcDbArc(6271F) Null Layer Redirected
AcDbLine(62720) Null Layer Redirected
AcDbLine(62721) Null Layer Redirected
AcDbArc(62722) Null Layer Redirected
AcDbArc(62723) Null Layer Redirected
AcDbLine(62724) Null Layer Redirected
AcDbLine(62725) Null Layer Redirected
AcDbLine(62726) Null Layer Redirected
AcDbLine(62727) Null Layer Redirected
AcDbLine(62728) Null Layer Redirected
AcDbLine(62729) Null Layer Redirected
AcDbLine(6272A) Null Layer Redirected
AcDbLine(6272B) Null Layer Redirected
AcDbLine(6272C) Null Layer Redirected
AcDbLine(6272D) Null Layer Redirected
AcDbLine(6272E) Null Layer Redirected
AcDbLine(6272F) Null Layer Redirected
AcDbLine(62730) Null Layer Redirected
AcDbLine(62731) Null Layer Redirected
AcDbLine(62732) Null Layer Redirected
AcDbLine(62733) Null Layer Redirected
AcDbLine(62734) Null Layer Redirected
AcDbLine(62835) Null Layer Redirected
AcDbBlockReference(62836) Null Layer Redirected
AcDbBlockReference(62836) BTR Id invalid
AcDbBlockReference(62836) could not be repaired. It will be Erased.
AcDbPolyline(62837) Null Layer Redirected
AcDbPolyline(6283E) Null Layer Redirected
AcDbPolyline(6284C) Null Layer Redirected
AcDbPolyline(62852) Null Layer Redirected
AcDbArc(62865) Null Layer Redirected
AcDbArc(62866) Null Layer Redirected
AcDbLine(62867) Null Layer Redirected
AcDbPolyline(6295E) Null Layer Redirected
Pass 2 12100 objects auditedAcDbLine(62D47) Null Layer
Redirected
AcDbLine(62D48) Null Layer Redirected
AcDbLine(62D49) Null Layer Redirected
AcDbLine(62D4A) Null Layer Redirected
AcDbLine(62D4B) Null Layer Redirected
AcDbLine(62D4C) Null Layer Redirected
AcDbLine(62D4D) Null Layer Redirected
AcDbLine(62D4E) Null Layer Redirected
AcDbLine(62D4F) Null Layer Redirected
AcDbLine(62D50) Null Layer Redirected
AcDbLine(62D51) Null Layer Redirected
AcDbLine(62D52) Null Layer Redirected
AcDbLine(62D53) Null Layer Redirected
AcDbLine(62D54) Null Layer Redirected
AcDbLine(62D55) Null Layer Redirected
AcDbLine(62D56) Null Layer Redirected
Pass 2 12200 objects auditedAcDbLine(62D57) Null Layer
Redirected
AcDbLine(62D58) Null Layer Redirected
AcDbLine(62D59) Null Layer Redirected
AcDbLine(62D5A) Null Layer Redirected
AcDbLine(62D5B) Null Layer Redirected
AcDbLine(62D5C) Null Layer Redirected
AcDbLine(62D5D) Null Layer Redirected
AcDbLine(62D5E) Null Layer Redirected
AcDbLine(62D5F) Null Layer Redirected
AcDbLine(62D60) Null Layer Redirected
AcDbLine(62D61) Null Layer Redirected
AcDbLine(62D62) Null Layer Redirected
AcDbPolyline(62D6B) Null Layer Redirected
AcDbPolyline(62D6C) Null Layer Redirected
AcDbPolyline(62D6D) Null Layer Redirected
AcDbPolyline(62D6D) Null Linetype Redirected
AcDbPolyline(62D6E) Null Layer Redirected
AcDbPolyline(62D6F) Null Layer Redirected
AcDbPolyline(62D70) Null Layer Redirected
AcDbPolyline(62D71) Null Layer Redirected
AcDbPolyline(62D72) Null Layer Redirected
AcDbLine(62D73) Null Layer Redirected
AcDbPolyline(62D74) Null Layer Redirected
AcDbPolyline(62D75) Null Layer Redirected
AcDbPolyline(62D76) Null Layer Redirected
AcDbLine(62D77) Null Layer Redirected
AcDbPolyline(62D78) Null Layer Redirected
AcDbLine(6301A) Null Layer Redirected
AcDbLine(6301B) Null Layer Redirected
AcDbLine(6301C) Null Layer Redirected
AcDbLine(6301D) Null Layer Redirected
AcDbLine(6301E) Null Layer Redirected
AcDbLine(6301F) Null Layer Redirected
AcDbLine(63020) Null Layer Redirected
AcDbLine(63021) Null Layer Redirected
AcDbLine(63022) Null Layer Redirected
AcDbLine(63023) Null Layer Redirected
AcDbLine(63024) Null Layer Redirected
AcDbLine(63025) Null Layer Redirected
AcDbLine(63026) Null Layer Redirected
AcDbLine(63027) Null Layer Redirected
AcDbLine(63028) Null Layer Redirected
AcDbLine(63029) Null Layer Redirected
AcDbLine(6302A) Null Layer Redirected
AcDbLine(6302B) Null Layer Redirected
AcDbLine(6302C) Null Layer Redirected
AcDbLine(6302D) Null Layer Redirected
AcDbLine(6302E) Null Layer Redirected
AcDbLine(6302F) Null Layer Redirected
AcDbLine(63030) Null Layer Redirected
AcDbLine(63031) Null Layer Redirected
AcDbLine(63032) Null Layer Redirected
AcDbLine(63033) Null Layer Redirected
AcDbLine(63034) Null Layer Redirected
AcDbLine(63035) Null Layer Redirected
AcDbLine(63036) Null Layer Redirected
AcDbLine(63037) Null Layer Redirected
AcDbLine(63038) Null Layer Redirected
AcDbLine(63039) Null Layer Redirected
AcDbLine(6303A) Null Layer Redirected
AcDbLine(6303B) Null Layer Redirected
AcDbLine(6303C) Null Layer Redirected
AcDbLine(6303D) Null Layer Redirected
AcDbLine(6303E) Null Layer Redirected
AcDbLine(6303F) Null Layer Redirected
AcDbLine(63040) Null Layer Redirected
AcDbLine(63041) Null Layer Redirected
AcDbLine(63042) Null Layer Redirected
AcDbLine(63043) Null Layer Redirected
AcDbLine(63044) Null Layer Redirected
AcDbLine(63045) Null Layer Redirected
AcDbLine(63046) Null Layer Redirected
AcDbLine(63047) Null Layer Redirected
AcDbLine(63048) Null Layer Redirected
AcDbLine(63049) Null Layer Redirected
AcDbLine(6304A) Null Layer Redirected
AcDbLine(6304B) Null Layer Redirected
AcDbLine(6304C) Null Layer Redirected
AcDbLine(6304D) Null Layer Redirected
AcDbLine(6304E) Null Layer Redirected
AcDbLine(6304F) Null Layer Redirected
AcDbLine(63050) Null Layer Redirected
AcDbLine(63051) Null Layer Redirected
AcDbLine(63052) Null Layer Redirected
AcDbLine(63053) Null Layer Redirected
AcDbLine(63054) Null Layer Redirected
AcDbLine(63055) Null Layer Redirected
AcDbLine(63056) Null Layer Redirected
AcDbLine(63057) Null Layer Redirected
AcDbLine(63058) Null Layer Redirected
AcDbLine(63059) Null Layer Redirected
AcDbLine(6305A) Null Layer Redirected
AcDbLine(6305B) Null Layer Redirected
AcDbLine(6305C) Null Layer Redirected
AcDbLine(6305D) Null Layer Redirected
Pass 2 12300 objects auditedAcDbLine(630EC) Null Layer
Redirected
AcDbLine(630ED) Null Layer Redirected
AcDbLine(630EE) Null Layer Redirected
AcDbBlockReference(630EF) Null Layer Redirected
AcDbBlockReference(630EF) BTR Id invalid
AcDbBlockReference(630EF) could not be repaired. It will be Erased.
AcDbPolyline(630F0) Null Layer Redirected
AcDbLine(630F1) Null Layer Redirected
AcDbLine(630F2) Null Layer Redirected
AcDbLine(630F3) Null Layer Redirected
AcDbLine(630F4) Null Layer Redirected
AcDbLine(630F5) Null Layer Redirected
AcDbLine(630F6) Null Layer Redirected
AcDbLine(630F7) Null Layer Redirected
AcDbLine(630F8) Null Layer Redirected
AcDbArc(630F9) Null Layer Redirected
AcDbLine(630FA) Null Layer Redirected
AcDbLine(630FB) Null Layer Redirected
AcDbLine(630FC) Null Layer Redirected
AcDbLine(630FD) Null Layer Redirected
AcDbLine(630FE) Null Layer Redirected
AcDbLine(630FF) Null Layer Redirected
AcDbLine(63100) Null Layer Redirected
AcDbLine(63101) Null Layer Redirected
AcDbPolyline(63102) Null Layer Redirected
AcDbPolyline(63103) Null Layer Redirected
AcDbLine(63104) Null Layer Redirected
AcDbArc(63105) Null Layer Redirected
AcDbArc(63106) Null Layer Redirected
AcDbArc(63107) Null Layer Redirected
AcDbLine(63108) Null Layer Redirected
AcDbLine(63109) Null Layer Redirected
AcDbArc(6310A) Null Layer Redirected
AcDbArc(6310B) Null Layer Redirected
AcDbLine(6310C) Null Layer Redirected
AcDbArc(6310D) Null Layer Redirected
AcDbBlockReference(6310E) Null Layer Redirected
AcDbBlockReference(6310E) BTR Id invalid
AcDbBlockReference(6310E) could not be repaired. It will be Erased.
AcDbCircle(6310F) Null Layer Redirected
AcDbCircle(63110) Null Layer Redirected
AcDbCircle(63111) Null Layer Redirected
AcDbCircle(63112) Null Layer Redirected
AcDbCircle(63113) Null Layer Redirected
AcDbArc(63114) Null Layer Redirected
AcDbArc(63115) Null Layer Redirected
AcDbArc(63116) Null Layer Redirected
AcDbArc(63117) Null Layer Redirected
AcDbArc(63118) Null Layer Redirected
AcDbArc(63119) Null Layer Redirected
AcDbArc(6311A) Null Layer Redirected
AcDbArc(6311B) Null Layer Redirected
AcDbArc(6311C) Null Layer Redirected
AcDbArc(6311D) Null Layer Redirected
AcDbLine(6311E) Null Layer Redirected
AcDbLine(6311F) Null Layer Redirected
AcDbArc(63120) Null Layer Redirected
AcDbLine(63121) Null Layer Redirected
AcDbArc(63122) Null Layer Redirected
AcDbLine(63123) Null Layer Redirected
AcDbLine(63124) Null Layer Redirected
AcDbLine(63125) Null Layer Redirected
AcDbArc(63126) Null Layer Redirected
AcDbLine(63127) Null Layer Redirected
AcDbLine(63128) Null Layer Redirected
AcDbArc(63129) Null Layer Redirected
AcDbLine(6312A) Null Layer Redirected
AcDbLine(6312B) Null Layer Redirected
AcDbArc(6312C) Null Layer Redirected
AcDbPolyline(6312D) Null Layer Redirected
AcDbPolyline(6312E) Null Layer Redirected
AcDbPolyline(6312F) Null Layer Redirected
AcDbPolyline(63130) Null Layer Redirected
AcDbPolyline(63131) Null Layer Redirected
AcDbPolyline(63132) Null Layer Redirected
AcDbPolyline(63133) Null Layer Redirected
AcDbCircle(63134) Null Layer Redirected
AcDbPolyline(63135) Null Layer Redirected
AcDbCircle(63136) Null Layer Redirected
AcDbCircle(63137) Null Layer Redirected
AcDbLine(63138) Null Layer Redirected
AcDbPolyline(63139) Null Layer Redirected
AcDbPolyline(6313A) Null Layer Redirected
AcDbLine(6313B) Null Layer Redirected
AcDbBlockReference(6313C) Null Layer Redirected
AcDbBlockReference(6313C) BTR Id invalid
AcDbBlockReference(6313C) could not be repaired. It will be Erased.
AcDbArc(6313D) Null Layer Redirected
AcDbArc(6313E) Null Layer Redirected
AcDbLine(6313F) Null Layer Redirected
AcDbPolyline(63140) Null Layer Redirected
AcDbPolyline(63141) Null Layer Redirected
AcDbPolyline(63142) Null Layer Redirected
AcDbPolyline(63143) Null Layer Redirected
AcDbPolyline(63143) Null Linetype Redirected
AcDbArc(63144) Null Layer Redirected
AcDbPolyline(63145) Null Layer Redirected
AcDbPolyline(63146) Null Layer Redirected
AcDbPolyline(63147) Null Layer Redirected
AcDbPolyline(63148) Null Layer Redirected
AcDbPolyline(63149) Null Layer Redirected
AcDbPolyline(6314A) Null Layer Redirected
AcDbPolyline(6314B) Null Layer Redirected
AcDbPolyline(6314C) Null Layer Redirected
Pass 2 12400 objects auditedAcDbLine(6314D) Null Layer
Redirected
AcDbPolyline(6314E) Null Layer Redirected
AcDbPolyline(6314F) Null Layer Redirected
AcDbRotatedDimension(63150) Null Layer Redirected
AcDbRotatedDimension(63153) Null Layer Redirected
AcDbLine(63156) Null Layer Redirected
AcDbPolyline(63157) Null Layer Redirected
AcDbPolyline(63158) Null Layer Redirected
AcDbPolyline(63159) Null Layer Redirected
AcDbPolyline(6315A) Null Layer Redirected
AcDbLine(6315B) Null Layer Redirected
AcDbLine(6315C) Null Layer Redirected
AcDbPolyline(6315D) Null Layer Redirected
AcDbPolyline(6315E) Null Layer Redirected
AcDbPolyline(6315F) Null Layer Redirected
AcDbLine(63160) Null Layer Redirected
AcDbPolyline(63161) Null Layer Redirected
AcDbRotatedDimension(63162) Null Layer Redirected
AcDbLine(63165) Null Layer Redirected
AcDbLine(63166) Null Layer Redirected
AcDbLine(63167) Null Layer Redirected
AcDbLine(63168) Null Layer Redirected
AcDbLine(63169) Null Layer Redirected
AcDbPolyline(6316A) Null Layer Redirected
AcDbLine(6316B) Null Layer Redirected
AcDbLine(6316C) Null Layer Redirected
AcDbLine(6316D) Null Layer Redirected
AcDbLine(6316E) Null Layer Redirected
AcDbLine(6316F) Null Layer Redirected
AcDbLine(63170) Null Layer Redirected
AcDbLine(63171) Null Layer Redirected
AcDbLine(63172) Null Layer Redirected
AcDbLine(63173) Null Layer Redirected
AcDbLine(63174) Null Layer Redirected
AcDbLine(63175) Null Layer Redirected
AcDbLine(63176) Null Layer Redirected
AcDbLine(63177) Null Layer Redirected
AcDbLine(63178) Null Layer Redirected
AcDbLine(63179) Null Layer Redirected
AcDbLine(6317A) Null Layer Redirected
AcDbLine(6317B) Null Layer Redirected
AcDbPolyline(6317C) Null Layer Redirected
AcDbPolyline(6317D) Null Layer Redirected
AcDbPolyline(6317E) Null Layer Redirected
AcDbPolyline(6317F) Null Layer Redirected
AcDbCircle(63180) Null Layer Redirected
AcDbLine(63181) Null Layer Redirected
AcDbLine(63182) Null Layer Redirected
AcDbCircle(63183) Null Layer Redirected
AcDbLine(63184) Null Layer Redirected
AcDbLine(63185) Null Layer Redirected
AcDbCircle(63186) Null Layer Redirected
AcDbLine(63187) Null Layer Redirected
AcDbLine(63188) Null Layer Redirected
AcDbCircle(63189) Null Layer Redirected
AcDbLine(6318A) Null Layer Redirected
AcDbLine(6318B) Null Layer Redirected
AcDbCircle(6318C) Null Layer Redirected
AcDbLine(6318D) Null Layer Redirected
AcDbLine(6318E) Null Layer Redirected
AcDbPolyline(63190) Null Layer Redirected
AcDbPolyline(63191) Null Layer Redirected
AcDbLine(63192) Null Layer Redirected
AcDbLine(63193) Null Layer Redirected
Pass 2 13400 objects auditedRegApp ACAD missing
Pass 2 13500 objects audited
Auditing Blocks


32 Blocks audited

Total errors found 7428 fixed 7428

Erased 788 objects

Regenerating model.
Error loading AcSign services

AutoCAD menu utilities loaded.

Re: Autocad

Objavljeno: 03 Avg 2014, 19:32
Napisal/-a Andrej Petrovčič
BAK je zadnja shranjena verzija. To je od tebe odvisno kdaj shranjuješ oz. kako imaš nastavljen "auto-save". Jaz ga imam nastavljenega na 5 minut. Me je izučilo.
Vsi časi so UTC+01:00 UTC+1
Stran 4 od 4

Teče na phpBB® Forum Software © phpBB Limited